EasyCork 1.75mm Dark 500 gram

$93.99 $186.99

Free Shipping

5 IN STOCK

Payment Options :

SKU :AST-18651

Calculate Shipping Charge

Estimated Arrival*:

Metro area: 3-7 working days
Regional area: 5-9 working days
Rural area: 6-12 working days
Category:

Product Description

EasyCork is a lightweight cork-filled PLA-based filament which is gravimetrically filled with approximately 30% cork fibres. The gravimetric filling with relatively lightweight cork fibres means that EasyCork has extremely high volumetric cork filling properties, allowing you to 3D print beautiful objects with great cork-like aesthetics and cork-like properties such as being lightweight and impact resistant.
EasyCork is a very easy to print material as it is based on our EasyFil PLA compound and the 30% gravimetrical filling with cork fibres make the filament absolutely warp-free.

Unique features

  • High cork filling
  • Real cork feel, look and smell
  • Very easy to print
  • Warp-free printing
  • Great thermal stability and filament flowing behaviour
  • Perfect first- and inter-layer adhesion
  • Can be printed at high printing speeds
  • Lightweight and impact resistant

General printing guidelines

Nozzle size: ≥ 0.15mm Layer height: ≥ 0.20mm Flow rate: ± 100%
Print temp: ± 210 – 260° C Print speed: High Retraction: Yes ± 5mm
Heat bed: ± 0 – 60° C Fan speed: 50-100% Experience level: Beginner

Above displayed settings are meant as guidance to find your optimal print settings. These ranges in settings should work for most printers, but please do feel free to experiment outside these ranges if you think it is suitable for your printer. There are a lot of different type of printers, hot-ends and printer offsets that it is extremely difficult to give an overall one-size-fits-all setting.

 Filament length

ρ: 1.027 g/cc 50 gr coil 0.5 Kg spool
Ø 1.75mm ± 20.2m ± 202m
Ø 2.85mm ± 7.6m ± 76m

 Nozzle cleaning

When printing with filled/composite filaments it is recommended to clean your nozzle immediately after printing by feeding 15-20cm PLA filament through your nozzle. This will make sure that any potential fillers are flown out of your nozzle. It is even better to use glow in the dark PLA as the extremely hard phosphorous particles are much more likely to scrape out residual waste from your nozzle.

 Product export information

HS Code: Description Country of origin
39169090 Monofilament Netherlands

 Compliance

This filament is compliant to below listed directives and regulations.

  • RoHS directive 2011/65/EC
  • REACH directive 1907/2006/EC

This declaration of conformity to directives and regulations is prepared according to our present standard of knowledge and may be amended if new cognitions are available and applies only for the above described products.

 

There are no reviews yet.

Be the first to review “EasyCork 1.75mm Dark 500 gram”

Our Distribution centres are working very closely with courier partners to make sure deliveries are made on time during the Coronavirus pandemic. Warehouse is working at normal capacity at this stage. However, due to the current situation in Victoria regarding COVID-19 and the impacts of the floods in the South Coast of NSW, some courier delays at this time are expected.

We seek your kind understanding during this period. Below are some updates from our courier partners for your reference.

Allied Express:

WA-Please be advised we are currently experiencing delays in the Metropolitan areas due to stormy weather conditions.

Our Bendigo agent is closed for deep cleaning today, and consequently no freight in that area or North West Victoria will be delivered today. Freight will move as normal tomorrow.

Due to the Flooding to the South Coast of NSW we are doubtful freight will travel today.

Feel free to contact us at sales@shopystore.com.au if you have any questions or need more information.